JRS-100-24V/12V/5V超薄開關電源+新款功放電源

JRS-100-24V/12V/5V超薄開關電源+新款功放電源

   JRS-150-12
1.產品說明（Product description）
精佳達科技\精達電源產品生產多年，機殼型AC/DC電源供應器已廣為市場采用。體積小、易安裝于極小機內空間，并具有極小待機功耗符合能源之星要求，具有CE安規認證,強耐環境性、過壓、過流、短路完善的保護,本產品采用自動化設備制造,100%滿載高溫老化，ATE智能化測試設備，產品質保三年。產品廣泛應用于工業自動化、LED顯示屏、工業控制、電子儀器。JINGJIADA TECHNOLOGY & JINGDA POWER PRODUCTS HAVE BEEN produced for many years, and the case type power supply unit has been widely used in the market. The machine is small in size, easy to install in a very small machine space, and has a very small standby power consumption in line with the energy star requirements, with CE safety certification, strong environmental resistance, over-voltage, over-current, short circuit protection, this product is manufactured with automated equipment, 100% full load high temperature aging, ATE intelligent test equipment, product quality guarantee for three years. Products are widely used in industrial automation, LED display screen, industrial control, electronic instruments.
2.產品參數特性：（Parameter characteristics of product）
產品型號（model）:JRS-150-12
直流輸出范圍（DC output range）：12.0 V, 0～12.5 A
輸出電壓精度 （Accuracy of output voltage):±2%
紋波（Ripple wave):100mVp-p
效率（Efficiency):90%
LED指示工作狀態:（Led indicates working status）
輸入電壓范圍 (Input voltage range): 85～264VAC/120～373VDC
空載損耗<0.2瓦（No-load loss & Lt; 0.2 W）
自然通風冷卻（Natural Ventilation Cooling）
輸入浪涌電流冷啟動:230V時為30A（Input surge current, cold start,30A at 230V）
電壓調整范圍（Voltage range）:11.5～12.8V
啟動上升及保持時間（Start-up and hold time） 230VAC滿載時（Full load）500ms,30ms,30ms/115VAC滿載時（Full load）500ms,30ms,12ms
漏電流（Leakage current）：<0.75mA / 240VAC
過載保護 過電流點在110%～150%，自動檢測,自動恢復（Overload protection, over-current point in 110% ~ 150% , automatic detection, automatic recovery）
過電壓保護 13.5～15V時關斷輸出電壓. （Turn off the output voltage when overvoltage protection is 13.5 ~15v）
絕緣特性（Insulation characteristic）  輸入端與輸出端間:3.75KVAC,輸入端與外殼間:2KVAC,輸出端與外殼間:0.5KVAC 1分鐘（Input and output: 3.75KVAC, input and Shell: 2KVAC, output and Shell: 0.5KVAC 1 minute）
工作溫度（Operating temperature）  -30～+70℃
可用于海拔5000地區（Can Be used at 5,000 elevation）
電磁兼容標準（EMC Standard）  EN61000-4-2,3,4,5,6,8,11,EN61000-6-2(EN50082-2)
接線方式（Connection Mode） 7P/9.5mm端子排（Terminal Block）
外形尺寸（Contour dimension） 134×97×30mm(長×寬×高)（Length, width and height）
機殼號（Case number） JD-GY-150
重量及包裝（Weight and packing）  0.4公斤/只(Kg / only)
3.警示（Warning）
為了防范觸電及燒傷危險,請勿拆除電源外殼.（Please do not remove the power supply case to prevent electric shock and burn.）
不能將電源安裝在潮濕環境和近水源處.（Do not install the power supply in a humid environment or near the water source.）
不能將電源暴露在高溫環境和近火源處.（Do not expose power source to high temperature and near fire source.）
輸出電壓和輸出電流不能超出規格書所規定的額定值范圍.（The output voltage and output current can not exceed the rating range specified in the specification.）
接地線(FG)必須與大地連接（The grounding FG must be connected to the earth）